Features of DETAKOM-A5 Active Lightning Conductors:

• Its most paramount feature is that its impact tension generator inside is covered with epoxy insulating material with a durability of 450kV/cm2.
• Another feature is that since its outer parts are covered with XL 304 stainless steel, it is resistant against dynamic power surging in from the air during lightning discharge and also it is not affected by acid rain caused by lightning discharge.
• Detakom-A5 lightning conductor was tested by BET BLITZSCHUTZ-EMV TECHNOLOGIEZENTRUM Company, Germany, and successfully passed the 100kA impact flow resistance test.
• It was tested in line with active lightning conductor test standards of French NF C 17-102 (Appendix C) Standard at METU Electric and Elektronical Laboratory and Icmet Craiova High Voltage Laboratory, and given Active Lightning Conductor title after displaying a high performance.
• It is produced under ISO9001-2000 Quality Certificate and 22 years of experience of Erkoç Electricity Ltd.
• Detakom®-A5 Active Lightning Conductor is produced by constant testing during the production process.

DETAKOM®-A5 Active Lightning Conductor Operation Procedure:

When the electrical field created by storm rises to 10-20 kV/m value, Detakom®-A5 Active Lightning Conductor generates a warning stream by the impact tension generator inside in a certain frequency and amplitude by gathering the required energy from the electrical field which creates the lightning. This stream creates a path that moves upward. This path which enables the lightning to flow down controllably, arrests the lightning on a vertex it forms above a large-diameter protection field above the building and conducts the lightning to the ground.

Together with its accelerator rod, impact tension generator, and inner structure, it is designed to safely conduct even the largest lightning streams by the help of its assemblies.

OTHER PRODUCTS

ALARM SYSTEMS

DSC Alarm Systems -- control panel with keypad & L-1 Camlock, temperature alert, relay module, output driver module door contact, horn with strobe, smoke detector, water leak sensor, transformer.

Available Alarm Systems Products:

• MAGNETIC contact
• VIBRATION contact point
• METAL DOOR contact
• ROLLER shutter contact
• PANIC push button
• EMERGENCY push button
• KICKBAR
• MONEYCLIP
• KEYSWITCH
• REMOTE plates
• JUNCTION boxes
• SOUNDING devices
• STROBE light
• FIRE products

Winland Electronics, Inc.

Your Environmental Security® Specialists for over 30 years.

Since 1972, Winland has been building Environmental Security Sensors and Alarms that provide peace of mind for our customers because they are adequately informed of adverse environmental conditions on their property. Winland is considered a pioneer in the industry offering an extensive product line with a track record of success.

Winland designs and manufacturers products that monitor, inform and alarm for unfavorable temperatures, improper humidity, water leakage and power failures. Winland also provides a driveway warning system for announcing the arrival of vehicles onto any driveway or roadway. Winland’s Temp Alert, Humid-Alert, WaterBug, Power-Out Alert, and Vehicle Alert are compatible with any hard wire or wireless alarm system.

Over the years Winland has become North America’s preferred source for temperature, humidity and water sensors as well as power failure and vehicle alert alarm products. Prodetech is the authorized distributor of Winland products in the Philippines.
 

Uninterruptible Power Supply - UPS

Backing up your system the intelligent way

EGYS LP series is more than a traditional UPS, CPU Controlled design, built-in AVR and smart communication interface, EGYS LP series not merely provides reliable power protection but also provide smart power management for increasing internet and ethernet applications.

EGYS LP series is the most cost-effective solution to power-protecting and power managing your mission critical PC, server, small network & valuable peripherals.

• Excellent voltage regulation ability
• Smart Microprocessor Control
• Modem/LAN Internet protection
• Smart RS-232 Interface for power management
• AC Line Surge Protection and Noise Filtering
• UPS Self-test function
• Smart Battery management
• Site wiring fault indicator
• Overload & Short Circuit protection
• DS Start capability
   

DEHUMIDIFIER

Provides automatic humidity and temperature control in the facility. The device keeps the room atmosphere dry to prevent dampness, rust or oxidation of sensitive electronic equipment and electrical devices.

EXHAUST FAN CONTROLLER

PRODETECH EFC Exhaust Fan Controller is designed to automatically activate exhaust fan unit when the temperature control device senses high temperature.